Titty Bittys 
Sunday, September 14, 2008, 17:03 - Project Story
Posted by Administrator
More titbits dealt with today, steering wheel assembly cleaned up and tightened, drivers door lock pin was in way of window winder assembly so had to reset it, rear seats back in after sealing in the behind seat section where the fuel tank is, in the hope of preventing some of the fuel smell. Carb choke spring re-wound and re-installed to operate flap, dodgy window winder repaired. They are a crazy design with a tapered pin holding the assembly together, which is great until there in any wear in the holes. A split pin might work, but have discovered a screw through the mechanism works wonders, and no more banging pins out with hammer and punch! Grease and oil change done also.

Things left to do:

* Wheel alignment front end
* Sound deadening under bonnet
* Carpet!
* Front tyres later down the track
* Sunvisor holders - find non rusty set



[ add comment ] ( 7 views )   |  permalink

<<First <Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Next> Last>>